porducts list
- Other [6]
contact datails
Togoeo Hydraulic Pump Equipment Co.,ltd
MR Chi HaoMiao
JiaoXia Industrial Garden DongOu Industrical Zone,Wenzhou,Zhejiang,China
86-577-67982910
MR Chi HaoMiao
JiaoXia Industrial Garden DongOu Industrical Zone,Wenzhou,Zhejiang,China
86-577-67982910
PV2R high-pressure hydraulic vane pump rated pressure of 170 kg, the displacement of 5.8 ~ 116 ml / r,
users may need to select domestic YB-E is also known as the
high-pressure vane pump. It is a motor output will be converted to
mechanical energy to the hydraulic energy conversion device, as in
the hydraulic system to provide a flow of hydraulic pressure
energy. PV2R vane pump high-pressure compact, small size, uniform
flow, pressure pulsation small, low noise, high efficiency and
reliable performance, and reasonable price, is the pressure of the
vane pump replacement products. The high-pressure hydraulic pump
stator blades, rotor blade with streaming into a screw fastener
assembly, ease of assembly and maintenance, and with axial
clearance compensation structure. 1, dual role of quantitative high-pressure hydraulic vane pump
shaft not directly bear on the radial force and the axial force, so
as to avoid damage to pump anomaly. 2, required for installation carefully rub-hole and the shaft connecting the surface to reduce the vibration caused by the YB-E-surface high-pressure pump shaft leaves the fretting, long-term accuracy with shaft sizes. 3, attention to the distinction between oil into the mouth and mouth filling. I usually into oil, filling small mouth, not reversed, when the YB-E high-voltage test vane pump signs to comply with the direction of the arrow only when activated motors to pump oil expulsion normal after officially started. 4, high-pressure hydraulic pump of oil absorption PV2R height less than 500 mm, the pump intake pressure of 0.02 MPa to 0.025 between the YB-E high-pressure pump displacement leaves greater demand higher pressure inhalation. 5, PV2R vane pump high-pressure oil into the mouth of the joint until the fuel tank over the entire surface oil pipelines and oil absorption annex engagement must strictly sealed and not part of any leakage, otherwise, they will produce large quantities in the fuel tank foam, air will make inhalation a pump cavitation caused pump noise, and damage to the hydraulic system caused the vibration. 6, in order to prevent high-pressure vane pump PV2R inhaled debris and reduce wear and tear, the vane pump high-pressure oil into the mouth to install the 100 ~ 180 um Oil Filter and its ability to filter pump flow rate should be not less than three times, while recommended in the Pai Oil Pipeline oil at the site of installation accuracy of 30 ~ 50 um Oil Filter to ensure the cleanliness of oil, and improve the stability of the hydraulic system hydraulic components of a working life. 7, in order to ensure high-pressure vane pump performance, long life, wear-resistant hydraulic system hydraulic oil should be used, recommended use of anti-wear N46 hydraulic oil, long-term work in the oil Wenyi 10 ℃ to 60 ℃ range. Design should adopt a closed tank, Oil Filter need regular cleaning and inspection of the quality of oil on the actual situation of the replacement oil. PV2R high pressure hydraulic vane pump's use parameter table
| ||||||||||||||||||||||||||
Do you want to show products of your own company? Join FREE now!
